Electrofusion is a method of joining MDPE, HDPE and other plastic pipes using special fittings that have built-in electric heating elements which are used to weld the joint together.

The pipes to be joined are cleaned, inserted into the electrofusion fitting (with a temporary clamp if required) and a voltage (typically 40V) is applied for a fixed time depending on the fitting in use. The built in heater coils then melt the inside of the fitting and the outside of the pipe wall, which weld together producing a very strong homogeneous joint. The assembly is then left to cool for a specified time. The joints produced tend to be more reliable than threaded fittings sealed with O-rings.


Reducing Saddle - Wye

These wastewater saddles enable a 45° connection of the supply pipe. Special tools are used to ensure a full bore hole and a permanent electrofusion weld. These saddles are able to be used on SDR11 to SDR26 pipes.

For technical information about this product, please click here

These fittings are manufactured to comply with EN 1610 and AS/NZS 4129:2008


Available From



Back to Polyethylene