Formed Bends


Otherwise known as "Swept" or "Sweep" bends, our formed bends are manufactured in sizes from 50mm to 500mm with future capability up to 1000mm. Our bends are made from extruded pipe which is then heated and formed to a standard range of radius and angles. 

Currently, all bends are manufactured & supplied in SDR11, 13.6 or 17 ratings.

For bends that are required with an unusual radius, this can be achieved but would require tooling to be developed to suit that radius and could be priced accordingly.


Formed bends, manufactured by Strata Precision Plastics is rated at the same rating as the extruded pipe it is manufactured from.


For information on our standard radius, click here




 All fittings are manufactured in accordance with AS/NZS 4129:2008 from pipe manufactured in accordance with AS/NZS 4130:2009.

Available From



Back to Polyethylene