Plain Tee Junction (Fabricated)

Fabricated Polyethylene Tee Junctions are manufactured by the butt welding process.


All fitings are manufatured with suitable pipe lengths for the fitting to be either Butt welded or Electrofusion welded into pipe lines.

Under ISO Standard 4427-3:2007  and PIPA Auspoly recommendations, these products are required to have a de-rating factor applied to it. This will result in the fitting only being able to have a constant working pressure that is 50% of the pipe class it is made from. I.e. PN10 pipe will rate at PN5


All fittings are manufactured in accordance with either AS/NZS 4129:2008 or AS/NZS 5065:2005 from extruded pipe manufactured in accordance with AS/NZS 4130:2009


Fabricated for non pressure applications

Available From



Back to Polyethylene